Elastollan 695A-15N 低速凝固晶点食品级TPU
Elastollan® 695A-15N
Thermoplastic Polyurethane Elastomer (Polyester)
BASF Corp. Thermoplastic Polyurethanes
产品说明：
Elastollan® 695AN is specifically formulated for extruded profile, sheet and film applications. It exhibits excellent abrasion resistance, toughness, high transparency, low gel, and low yellowness index. It has excellent damping characteristics and outstanding resistance to tear propagation. Elastollan® 695AN conforms to the FDA food contact regulations as described in book 21, section 177.2600 and 177.1680 for both wet and dry food contact applications respectively. Elastollan® 695AN is supplied uncolored in pellet form.
物性信息：
| 特性 | 低速凝固晶点 良好的撕裂强度 良好耐磨损性 韧性良好 食品接触的合规性 |
| 机构评级 | FDA 21 CFR 177.1680 FDA 21 CFR 177.2600 |
| 外观 | 清晰/透明 |
| 加工方法 | 挤出 注射成型 |
| 比重 | 1.23 | g/cm³ | ASTM D792 |
| 熔流率（熔体流动速率） (190°C/21.6 kg) | 20 到 60 | g/10 min | ASTM D1238 |
| 肖氏硬度 (邵氏 A) | 94 | ASTM D2240 |
| 拉伸模量 (注塑) | 40.0 | MPa | ASTM D412 |
| 弯曲模量 (注塑) | 44.1 | MPa | ASTM D790 |
| 泰伯耐磨性 | 25.0 | mg | ASTM D1044 |
| Abrasion - DIN | 30 | mm³ | DIN 53516 |
| Softening Point - DMA | 87 | °C | 内部方法 |
| 拉伸应力 | ASTM D412 | ||
| 应变 | 14.5 | MPa | ASTM D412 |
| 300%应变 | 31.7 | MPa | ASTM D412 |
| 抗张强度 | 40.7 | MPa | ASTM D412 |
| 伸长率 (断裂) | 450 | % | ASTM D412 |
| 撕裂强度 1 | 149 | kN/m | ASTM D624 |
| 压缩yongjiu变形 | ASTM D395B | ||
| 23°C, 22 hr | 25 | % | ASTM D395B |
| 70°C, 22 hr | 40 | % | ASTM D395B |
展开全文
相关产品
