Celcon M50 Acetal (POM)
发布：2024-04-11 10:34，更新：2024-04-30 07:02
Celcon® M50
Acetal (POM) Copolymer
Celanese Corporation
产品说明：
Celcon® M50 is a extrusion and injection molding grade with an intermediate viscosity for good processability with higher toughness than general purpose grades.
Chemical abbreviation according to ISO 1043-1: POM
物性信息：
| 黄卡编号 |
|
| 特性 |
|
| RoHS 合规性 |
|
| 加工方法 |
|
| 树脂ID (ISO 1043) |
|
| 比重 | 1.41 | g/cm³ | ASTM D792, ISO 1183 |
| 溶化体积流率（MVR） (190°C/2.16 kg) | 4.30 | cm³/10min | ISO 1133 |
| 收缩率 | ASTM D955 | ||
| 流动 | 2.2 | % | ASTM D955 |
| 横向流动 | 1.8 | % | ASTM D955 |
| 吸水率 | ISO 62 | ||
| 饱和, 23°C | 0.75 | % | ISO 62 |
| 平衡, 23°C, 50% RH | 0.20 | % | ISO 62 |
| 拉伸模量 | 2500 | MPa | ISO 527-2/1A/1 |
| 抗张强度 | |||
| 屈服, -40°C | 94.5 | MPa | ASTM D638 |
| 屈服, 23°C | 60.7 | MPa | ASTM D638 |
| 屈服, 71°C | 34.5 | MPa | ASTM D638 |
| 屈服 | 63.0 | MPa | ISO 527-2/1A/50 |
| 拉伸应变 (屈服) | 12 | % | ISO 527-2/1A/50 |
| 弯曲模量 (23°C) | 2400 | MPa | ISO 178 |
| 简支梁缺口冲击强度 (23°C) | 8.5 | kJ/m² | ISO 179/1eA |
| 悬壁梁缺口冲击强度 (23°C) | 7.5 | kJ/m² | ISO 180/1A |
其他新闻
- Celcon M450 齿轮和轴承POM 2024-04-30
- Celcon M270 M270UV 紫外线稳定 2024-04-30
- Celcon M25 M25UV 耐疲劳POM 2024-04-30
- Celcon M15HP 美国塞拉尼斯OM 2024-04-30
- Celcon M140 M140-L1 Celanese代理商 2024-04-30
- Celcon LW90 LW90-F2 LW90FS-K LW90-S2 LW90-SC 2024-04-30
- Celcon LW25-S2 硅酮POM耐磨损 2024-04-30
- Celcon LU02 抗紫外线POM 2024-04-30
- Delrin FG500P NC010 食品级POM 2024-04-30
- Delrin FG500MP NC010 2024-04-30
- Delrin FG500AL NC010 2024-04-30
- Delrin FG311DP NC010 2024-04-30
- Delrin FG150 NC010 POM批发货源一手 2024-04-30
- Delrin FG100TL NC010 齿轮POM 2024-04-30
- Delrin FG100P NC010 杜邦代理 2024-04-30
