公司新闻
Makrolon PC ET PC UV112
发布时间： 2024-03-25 12:08 更新时间： 2025-01-17 07:02
产品说明：
Main characteristics:
• High toughness
• Good heat resistance
• Glass-like transparency, optical quality
• High dimensional accuracy and stability
Grade characteristics:
• PC/UV absorber concentrate
• High viscosity; easy release
• Special grade for the coextrusion of Makrolon ET base resins
As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
物性信息：
| 密度 | 1.19 g/cc | 0.0430 lb/in³ | ISO 1183-1 |
| 熔体流动速率 | 10 g/10 min @Load 1.20 kg, Temperature 300 °C | 10 g/10 min @Load 2.65 lb, Temperature 572 °F | ISO 1133 |
| 简支梁无缺口冲击强度 | NB @Temperature 23.0 °C | NB @Temperature 73.4 °F | ISO 179-1eU |
| 体积电阻率 | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | IEC 60093 |
| 表面电阻 | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
| 载荷下热变形温度(0.46 MPa) | 130 °C | 266 °F | ISO 75-1,-2 |
| 载荷下热变形温度(1.8 MPa) | 118 °C | 244 °F | ISO 75-1,-2 |
| 维卡软化温度 | 136 °C @Load 5.10 kg | 277 °F @Load 11.2 lb | 50°C/h; ISO 306 |
| 加工（熔体）温度 | 300 °C | 572 °F | Injection molding; ISO 294 |
| 模具温度 | 80.0 °C | 176 °F | Injection molding; ISO 294 |
| 射速 | 200 mm/sec | 7.87 in/sec | ISO 294 |
其他新闻
- Makrolon PC ET PC UV110 2025-01-17
- Makrolon PC 6455 6457 2025-01-17
- Makrolon PC 6267 PC X 2025-01-17
- Makrolon PC 6165 PC X 科思创6265 2025-01-17
- Makrolon PC 3258 医疗级PC环氧乙烷消毒 2025-01-17
- Makrolon PC 3206 3207 3208 2025-01-17
- Makrolon PC 3152 3156 3158 2025-01-17
- Makrolon PC 3108 3107 PC MAS167 2025-01-17
- Makrolon PC 3105 3106 食品接触PC 2025-01-17
- Makrolon PC 2856 2858 2865科思创changjiazhixiao 2025-01-17
- Makrolon PC 2807 PC MAS167 2025-01-17
- Sarlink TPE RV-2668DN RV-2670D RV-2671DN NAT 2025-01-17
- Sarlink TPE RV-2240 RV-2250D BLK 111 2025-01-17
- Sarlink TPE RV-2235B RV-2235B-01 XRD 2025-01-17
- Sarlink TPE OM-2368N Teknor Apex公司 2025-01-17
