Makrolon PC ET PC UV130
发布：2024-03-25 12:09，更新：2024-11-23 07:02
产品说明：
Main characteristics:
• High toughness
• Good heat resistance
• Glass-like transparency, optical quality
• High dimensional accuracy and stability
Grade characteristics:
• PC/UV absorber concentrate
• High viscosity; easy release
• Special grade for the coextrusion of Makrolon ET base resins
As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
物性信息：
| 密度 | 1.19 g/cc | 0.0430 lb/in³ | ISO 1183-1 |
| 熔体流动速率 | 11 g/10 min @Load 1.20 kg, Temperature 300 °C | 11 g/10 min @Load 2.65 lb, Temperature 572 °F | ISO 1133 |
| 简支梁无缺口冲击强度 | NB @Temperature 23.0 °C | NB @Temperature 73.4 °F | ISO 179-1eU |
| 体积电阻率 | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | IEC 60093 |
| 表面电阻 | 1.00e+16 ohm | 1.00e+16 ohm | IEC 60093 |
| 载荷下热变形温度(0.46 MPa) | 128 °C | 262 °F | ISO 75-1,-2 |
| 载荷下热变形温度(1.8 MPa) | 116 °C | 241 °F | ISO 75-1,-2 |
| 维卡软化温度 | 134 °C @Load 5.10 kg | 273 °F @Load 11.2 lb | 50°C/h; ISO 306 |
| 加工（熔体）温度 | 300 °C | 572 °F | Injection molding; ISO 294 |
| 模具温度 | 80.0 °C | 176 °F | Injection molding; ISO 294 |
| 射速 | 200 mm/sec | 7.87 in/sec | ISO 294 |
其他新闻
- Makrolon PC ET PC UV120 2024-11-23
- Makrolon PC ET PC UV112 2024-11-23
- Makrolon PC ET PC UV110 2024-11-23
- Makrolon PC 6455 6457 2024-11-23
- Makrolon PC 6267 PC X 2024-11-23
- Makrolon PC 6165 PC X 科思创6265 2024-11-23
- Makrolon PC 3258 医疗级PC环氧乙烷消毒 2024-11-23
- Makrolon PC 3206 3207 3208 2024-11-23
- Makrolon PC 3152 3156 3158 2024-11-23
- Makrolon PC 3108 3107 PC MAS167 2024-11-23
- Makrolon PC 3105 3106 食品接触PC 2024-11-23
- Makrolon PC 2856 2858 2865科思创changjiazhixiao 2024-11-23
- Makrolon PC 2807 PC MAS167 2024-11-23
- Sarlink TPE RV-2668DN RV-2670D RV-2671DN NAT 2024-11-23
- Sarlink TPE RV-2240 RV-2250D BLK 111 2024-11-23
