Hostaform C 9021 TF XAP2 PTFE润滑剂POM
Hostaform® C 9021 TF XAP² ™
Acetal (POM) Copolymer
Celanese Corporation
产品说明：
Chemical abbreviation according to ISO 1043-1: POM
Molding compound ISO 9988- POM-K, M-GNS, 2-2
POM copolymer
Injection molding type, modified with PTFE; good
chemical resistance to solvents, fuel and strong alkalis as well as
good hydrolysis resistance; high resistance to thermal and oxidative
degradation; for sliding combinations with very low coefficient of
friction.
Reduced emission grade. Emissions according to VDA 275 < 5 mg/kg
Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness
more than 1 mm.
Ranges of applications: For sliding combinations with very low
coefficient of friction.
FMVSS = Federal Motor Vehicle Safety Standard (USA)
Preliminary data sheet
物性信息：
| 添加剂 |
|
| 特性 |
|
| RoHS 合规性 |
|
| 加工方法 |
|
| 树脂ID (ISO 1043) |
|
| 密度 | 1.51 | g/cm³ | ISO 1183 |
| 溶化体积流率（MVR） (190°C/2.16 kg) | 6.00 | cm³/10min | ISO 1133 |
| 收缩率 | ISO 294-4 | ||
| 垂直流动方向 | 1.7 | % | ISO 294-4 |
| 流动方向 | 2.0 | % | ISO 294-4 |
| 吸水率 (饱和, 23°C) | 0.65 | % | ISO 62 |
| 拉伸模量 | 2350 | MPa | ISO 527-2/1A/1 |
| 拉伸应力 (屈服) | 47.0 | MPa | ISO 527-2/1A/50 |
| 拉伸应变 (屈服) | 7.0 | % | ISO 527-2/1A/50 |
| 标称拉伸断裂应变 | 16 | % | ISO 527-2/1A/50 |
| 拉伸蠕变模量 | ISO 899-1 | ||
| 1 hr | 2000 | MPa | ISO 899-1 |
| 1000 hr | 1150 | MPa | ISO 899-1 |
| 弯曲模量 (23°C) | 2250 | MPa | ISO 178 |
- Hostaform C 9021 SW XAP2 LS 减声器POM 2024-11-25
- Hostaform C 9021 S OEK 硅酮润滑剂POM 2024-11-25
- Hostaform C 9021 MD POM特性 2024-11-25
- Celcon MC270-HM POM比重收缩率吸水率 2024-11-25
- Celcon MC270 高刚性POM 2024-11-25
- Celcon M90UV POM抗紫外线性能良好 2024-11-25
- Celcon M90 POM薄壁 2024-11-25
- Celcon M90SW POM材料供应商 2024-11-25
- Celcon M90AW 齿轮用pom耐磨 2024-11-25
- Celcon M90-45XAP 聚甲醛POM 2024-11-25
- Celcon M90-45H F1抗紫外线POM 2024-11-25
- Celcon M90-34 POM物性表 2024-11-25
- Celcon M90-07 POM泰科纳 2024-11-25
- 美国塞拉尼斯POM代理商Celanese 2024-11-25
- Celcon M50 Acetal (POM) 2024-11-25
